Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Contact Us
  • Home
  • Products
  • Safety
  • Safety logic control systems

How to install USB drivers for G9SP

Written by Arlo D'Cruz

Updated at September 1st, 2023

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Products
    Automation Systems Control Components Motion & Drives Quality control & Inspection Robotics Safety Sensing Services Software Switching Components
  • Amplify e-Store
    e-Store public
  • Public CSC
+ More

How to install USB drivers for G9SP

  1. Open Device Manager.
  2. Right click on the “Omron‐PLC” icon and select “Update drivers”.
  3. Click “Browse my computer for driver software”.
  4. Make sure the path in the screenshot below is what’s exactly on your screen then click “Next”. If it prompts you that you are about to install drivers from Omron just click “Yes”. Your USB drive should now be installed. 
Delete

Info

In the event that windows fails to install the driver, you may attempt to disable the "Core Isolation" feature in windows. Please note that this will disable a windows security feature and cannot be re-enabled while the drivers are installed.


g9sp driver usb

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • Step by Step Guide - NX-SL3300 + Estop using Sysmac Studio
  • Step by Step Guide : NX-SL3300 + G7SA with EDM Sample Sysmac Program
  • Step by Step Guide : How to exchange variable between safety controller and non safe controller (NJ/NX) using Sysmac Studio
  • NX CIP Safety Connection Guide to KUKA KRC5 KSS version 5.1
  • Unable to open SYSMAC CIP Safety Program

Definition by Author

0
0
Expand