Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Contact Us
  • Home

Connecting to a V460 Handheld Reader

Written by Luke Ellacott

Updated at October 18th, 2024

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Products
    Automation Systems Control Components Motion & Drives Quality control & Inspection Robotics Safety Sensing Services Software Switching Components
  • Amplify e-Store
    e-Store public
  • Public CSC
+ More

Connecting to V460

You will need:

 1. Ethernet Cable for V460-H-to-PoE Injector Connection

 2. PoE Injector (IEEE 802.3af-compliant) 

3. Ethernet Cable for PoE Injector-to-Host Connection

 4. Host PC

The recommended parts list is as follows. 

Connect V460 to Weblink 

  1. Change the IP address of the V460 if necessary from the default 192.168.188.2

Change to IP address of the PC. 

You can also connect to Weblink with Omron's Device Discovery utility. 

v460 barcode reader

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • Connecting an NJ/NX PLC with a Microscan Camera (MV40)
  • Unable to open SYSMAC CIP Safety Program
  • Omron Microscan Cameras: How to use Locate Shape and Position Correction

Definition by Author

0
0
Expand