Contact Us
If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.
yang.qiu@omron.com
Article
Last Month
Safety design working principle: Wiring diagram example:
As above shown: Required intelligent tap applications: 1.Interlock 2. Lockout Reset 3. Pro-Reset 4. PSDI 5. EDM ( External Device Monitoring) 6. Muting 7. Blanking 8. Reduced Resolution 9. Warning Zone 10. Operating range selection 11. Response time adjustment
Must-have cables: F39-JGXXB-D ( CN1) F39-jGXXB-L ( CN4) F39-JGXXA-D ( CN2)
Setup diagram: Bill of materials
F39-SGIT-IL3 is required for connecting F3SG-SR/PG light curtain to SD3 manager software.
Note, It is necessary to use the same 24VDC power supply for both light curtain and Safety controller like G9SE or Safety PLCs.
Only Type4 model light curtain for PG range, it is only designed for Perimeter and access guarding. Part number selection:
This document shows how to set up CP1W-EIP61 Ethernet/IP option board: Set DIP Switch to enable slot 1 or 2. Related Ethernet/IP Settings: Instance assembly 102 100 byte ( Inputs)Instance assembly 103 100 byte ( outputs)Configuration: 128.EIP61 card normal modeFixed address memory: memory:If using CP1W-EIP61 normal mode, which allows data exchange 5
Light curtain setup: Bill of materials ( Example):
q Lamp (F39-SGLP) • It shows the light curtain status in 3 colors: • Visible from each direction up to 10 m of distance • Colour <-> Status configurable by SD3 Manager • Very useful for the Muting function • Scan code for mutual interference prevention can be set by the A/B switch on the top • It can be connected to the emitter and receiver
F3SG-SR range light curtain is designed for finger/Hand/Arm & Leg/Body protection: F3SG-PG range light curtain is designed for perimeter & access guarding protection:
System setup: Bill of materials ( Example):
F3SG-SR/PG Cable connection examples:
This document shows how to set up a shared folder on a PC via network sharing for the FHV7 Vision controller. Step1: PC ConfigurationCreate New Folder under Documents.Name this ‘OMRON FHV’ to match other vision software folders. Right click new folder and select Properties Go to the ‘Sharing’ tab: Select ‘Advanced Sharing’: Select ‘Share this fold