Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Contact Us
  • Home

Setup of Historical and Active alarm viewer on the NA HMI

Written by Luke Ellacott

Updated at October 18th, 2024

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Products
    Automation Systems Control Components Motion & Drives Quality control & Inspection Robotics Safety Sensing Services Software Switching Components
  • Amplify e-Store
    e-Store public
  • Public CSC
+ More

Introduction 

The NA series has an alarm feature to display the status information about alarms, both live and historical information. 

To use the Alarm Viewer the following steps needs to be taken. 

On the HMI Sysmac page, under ‘HMI Controls’ you will need to use the ‘User Alarm Viewer’ to receive a log of the alarms. 

There are two object display modes:

• Active Display mode – ‘Active’ User Alarms only are displayed
• Historical Display mode – The User Alarm Log is displayed showing the history of all User Alarm events

Under properties please select the Historical mode box to allow for alarm history. 

 

alert viewer alarm setup

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

  • How to replace and configure 8 channel profinet input card with 4 channel profinet output card
  • Step by Step Guide - NA5 remote monitoring/operation via VNC
  • Connecting your NA5 HMI to a CS1G/H PLC

Definition by Author

0
0
Expand