How to configure the FHV output as One-Shot
You may select from the following two methods for the timing of when the Overall Judgment (OR) signal turns OFF after measurement result confirmation.
This setting can be changed by setting One-shot OR signal in the communications specifications.
One-shot Output Disabled (Default)
The OR signal stays ON until the judgment changes.

One-shot Output
OR signal output stays ON for a certain amount of time, and then it is turned OFF again.
The time to maintain the OR signal output can be specified. (Setting range: 0.1 to 1000.0 [ms]).

The output type and period can be configured in the System Settings → Communication. Tick “One-shot OR signal” to enable one-shot behavior. The one-shot period is set in the “Output time[ms]” field.
