Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Contact Us
  • Home

NX CPU safety program synchronisation

Written by Luke Ellacott

Updated at April 13th, 2023

Contact Us

If you still have questions or prefer to get help directly from an agent, please submit a request.
We’ll get back to you as soon as possible.

Please fill out the contact form below and we will reply as soon as possible.

  • Products
    Automation Systems Control Components Motion & Drives Quality control & Inspection Robotics Safety Sensing Services Software Switching Components
  • Amplify e-Store
    e-Store public
  • Public CSC
+ More

Transferring program 

To Transfer the PLC and Safety PLC program to the controller the following steps need to be followed. 

  1. Select Online from the controller menu or press the Go Online Button. 
  2. Press the Synchronize button
  3. After pressing the Synchronize button, the comparison window will pop up, click on 'Transfer To Controller' 
Delete

Validating the safety program

To successfully upload the safety program to a safety CPU the following steps are required. 

  1. Press the DEBUG mode icon 
  2. A confirmation window will show
  3.  After pressing the OK button, a pop up asking to change modes will show, press Yes.
  4. follow the on-screen prompts selecting Yes or OK if acknowledged. There will be a number of these  pop-ups to follow asking if its ok to deactivate the safety systemss 
  5. After acknowledging these controller statuses, you are now able to enter Debug mode. At this stage the program will begin to transfer to the safety CPU 
  6. Additional prompts will pop up, select ok or yes to these.
  7. Once all safety functions are satisfied, select the Validate button to store the safety program on the CPU. 
  8. On completion of the validation, an alert will show asking to change the safety CPU to run mode on the next startup. 


Delete

Warning

Unvalidated safety programs are still transferred to the safety CPU, however will enter DUBUG(stopped) mode



Delete


nx plc sl3300 validation safety plc

Was this article helpful?

Yes
No
Give feedback about this article

Related Articles

Definition by Author

0
0
Expand